Perkin-Elmer TITAN MPS, User Manual

Page: 23 / 161

13
Fuses
• the electromagnetic disturbance generated does not exceed the level above
which radio and telecommunications equipment or other equipment
cannot operate as intended;
• it has a level of immunity to the electromagnetic disturbance to be
expected in its intended use which allows it to operate without
unacceptable degradation of its intended use.
Use of this product in residential areas may cause interference and such use should
be avoided unless special measures are taken by the user to restrict emissions to a
level that allows the reception of broadcast emissions.
When working with the instrument:
• Connect the instrument to a correctly installed line power outlet that has a
protective conductor connection (earth ground).
• Do not operate the instrument with any covers or internal parts removed.
• Do not attempt to make internal adjustments or replacements except as
directed in the manuals.
• Disconnect the instrument from all voltage sources before opening it for
any adjustment, replacement, maintenance, or repair. If afterwards, the
opened instrument must be operated for further adjustment, maintenance,
or repair, this must only be done by a PerkinElmer Service engineer or a
similarly trained and authorized person.
• Whenever it is possible that the instrument is no longer electrically safe for
use, make the instrument inoperative and secure it against any
unauthorized or unintentional operation. The electrical safety of the
instrument is likely to be impaired if, for example, the instrument shows
visible damage; has been subjected to prolonged storage under
unfavorable conditions; or has been subjected to severe stress during
transportation.
Fuses
Use only fuses with the required current rating and of the specified type for
replacement.
Do not use makeshift fuses or short-circuit the fuse holders.