Perkin-Elmer TITAN MPS, User Manual

Page: 50 / 161

40
Installation
2. Record any visible damage on the waybill before accepting the shipment.
Notify your local PerkinElmer customer support engineer immediately.
1. Place the carton on the floor in front of the bench on to which the Titan MPS
will be placed.
2. Cut the bands that hold the carton together, lift off the top of the shipping
carton.
3. Pull out all the foam pieces that secure the Titan MPS in the box.
4. Remove all other components.
5. Remove the polyethylene bag covering Titan MPS.
6. Inspect the Titan MPS for any shipping damage such as cracks, scratches and
dents.
7. Prepare to lift the Titan MPS out of the carton. The bench should be nearby.
Recycling the Instrument Box
If you plan on moving your Titan MPS you may want to keep the cardboard box
that the Titan MPS was shipped in. If you need to dispose of the cardboard box
please do so in accordance with local environmental regulations
SUPPLIES, ACCESSORIES, AND REPLACEMENT PARTS can be ordered
directly from PerkinElmer. For further information visit our website at
www.perkinelmer.com or contact your local PerkinElmer representative.
The Titan MPS weighs 53 kg (117 lbs). Use proper lifting posture when
lifting the Titan MPS out of the carton.
Note
PerkinElmer offers a bench specifically designed for the Titan MPS and its
accessories. This bench (Part No. N0777900) is very useful in labs which
are tight on bench space or which require frequent repositioning of the
equipment.
!
Warning