Pentair JUNG PUMPEN HIGHLOGO 1-00, Instruction Manual

Page: 22 / 64

22
ENGLISH
TECHNICAL DATA
Weight 4 kg
Protection category IP 44
Operating voltage
1/N/PE x 230 V, 50 Hz
3/N/PE x 400 V, 50 Hz
Power consumption of control unit Type 8 W
Control fuse
F1 fine-wire fuse 5x20 mm, 6.3 A T/MT; EN 60127-2-5, DIN 41571-2
F2 fine-wire fuse 5x20 mm, 2.0 A T/MT; EN 60127-2-5, DIN 41571-2
High water alarm emergency supply (optional) 9V NiMH rechargeable batteries
Terminals
2.5 mm² push-in terminals on the PCB
4 mm² push-in terminals on top hat rail
Screw terminals 4 mm² at the motor protection relay/ contactor
Screw terminal 6/10 mm² for potential equalisation
Motor protection
Motor protection switch on top hat rail / motor protection relay on
contactor
Motor current range of pump(s)
- HighLogo 1-25 / 46 / 610 / 910
- HighLogo 2-25 / 46 / 610 / 910
2.5-4.0 / 4.0-6.0 / 6.3-9.0 / 9.0-12.0 A
2.5-4.0 / 4.0-6.3 / 6.3-10.0 / 6.3-10.0 A
Monitoring of rotational field / phase failure
Error message given for anti-clockwise rotating field and if a power
phase fails
Temperature range in operation -20 … 50°C
Temperature range in storage -20 … 70°C
Air humidity 0 to 90% RH, with no condensation
Pressure switch 0,005/0,010 bar / Pmax: 0,3 bar
Level sensor, input 4 - 20 mA (two-wire) including stabilised supply voltage 24V
Level sensor, supply voltage 24V with 0 - 24mA
Level sensor, final value measuring range 200-400 cm head of water, ± 2%
Level sensor, resolution of level measurement dis-
play
1 cm
Switch input, AUX and thermal contact 24 V, 4 mA
Powered alarm relay 230 V AC, max 2 A (AC1)
Potential-free alarm relay 5A, 250 V AC, 24 V DC
Method used for measuring current via current transformer and A/D converter
Current transformer 0 - 20 A, ± 10%