PCAN-Router Pro – User Manual
12
3
Hardware Adjustments
You can adjust some hardware settings on the circuit board of the
PCAN-Router Pro:
Using an alternative CAN transceiver module
(see chapter 3.1 on page 13)
Adjusting the termination for a CAN bus
(see chapter 3.2 on page 16)
Setting the Router ID for the configuration
(see chapter 3.3 on page 18)
Enabling the 5-Volt supply for external devices
(see chapter 3.4 on page 20)
Enabling the supply of the router via a D-Sub connector
(see chapter 3.5 on page 22)
Replacing the button cell for the real-time clock (RTC)
(see chapter 3.6 on page 24)