PCAN-Router Pro – User Manual
15
12.
Screw the two screws at the lower corners of the front
cover.
13.
Restart the device by connecting power supply again.
After the restart, the PCAN-Router Pro automatically detects the
type of the inserted CAN transceiver module and adjusts the
according
default bit rate
for the CAN channel (see table above).
The bit rate can be changed by a configuration.
Note:
Having customized equipment, if there is no CAN
transceiver module with wake-up function, the PCAN-Router
Pro must be switched on with an external wake-up signal (see
section 5.7.3 on page 37).