Peak PCAN-Router Pro, User Manual, Page: 30 / 66

PCAN-Router Pro – User Manual
30
The PCAN-Router Pro package can be downloaded from the product
page under Downloads or from the following page:
This configuration has following properties:
All incoming messages from the four CAN channels are written
to an inserted CompactFlash card.
No forwarding is done between the four CAN channels.
The LEDs for the CAN ports blink during CAN traffic; LEDs 1, 3,
5, and 7 (green) for incoming, LEDs 2, 4, 6, and 8 (red) for
outgoing CAN messages.
Via CAN channel 1 status CAN messages are provided for
request (RTR) containing information related to the logging
function and the CompactFlash card (see following tables).
Optionally: The battery buffered real-time clock (RTC) can be set
and recalled via CAN channel 1 (see section 5.4
Setting the Real-
Time Clock on page 32).
5.3.1 Structure of the Status Messages
Applies to the standard firmware.
CAN Property Message GetTraceStatus_R
ID 7F0h
Data length
4 bytes
Transmit cycle
time none (0 ms)
RTR yes
Format Intel
(Little Endian)
Data See following table