PCAN-Router Pro – User Manual
19
5.
Turn the
ID
rotary switch on the board to your desired
position. Use a slotted screwdriver, for example.
6.
Put the cover back onto the casing by taking care of LED
light guides.
7.
Screw the four screws at the upper corners of the housing
on the front and back side.
8.
Restart the device by connecting power supply again.
After the restart, the changed Router ID will be active.
During operation with a configuration the LED
μ
C Status
blinks
green every second. If a configuration for the set Router ID does not
exist, the LED blinks twice as fast.