PCAN-Router Pro – User Manual
25
6.
Put the cover back onto the casing by taking care of LED
light guides.
7.
Screw the four screws at the upper corners of the housing
on the front and back.
8.
Restart the device by connecting power supply again.
A new button cell lasts several years. If the internal clock indicates
an unexpected time, take out the button cell and measure its vol-
tage. This should be around the nominal 3.0 Volts. If the measured
voltage is lower than 2.5 Volts, you should replace the button cell
with a fresh one.
Find more details about recalling and setting the time in sections 5.3
Shipping Configuration on page 29 and 5.4 Setting the Real-Time