PCAN-Router Pro – User Manual
29
Transceiver Module
Transmission Standard
Standard
Transmission
Rate
PCAN-Transceiver TJA1041
Transceiver installed by default.
High-speed CAN ISO 11898-2
500 kbit/s
PCAN-Transceiver PCA82C251
High-speed CAN ISO 11898-2 500 kbit/s
PCAN-Transceiver MAX3057-ISO
High-speed CAN ISO 11898-2 500 kbit/s
PCAN-Transceiver TH8056
Single-wire CAN SAE J2411
33.3 kbit/s
PCAN-Transceiver TJA1055
Low-speed CAN ISO 11898-3
125 kbit/s
The default bit rate is enabled if the current configuration in the
PCAN-Router Pro does not provide another bit rate. In a configu-
ration the bit rate can be set independently for each CAN channel.
This is done with the I/O function
70h (Special Out) > CAN Bitrate.
Tip:
If the communication with the PCAN-Router Pro is preven-
ted because you do not know the bit rates used by a configu-
ration, you can set the Router ID to a position without configu-
ration (see section 3.3 on page 18). Then the default bit rate is
enabled.
5.3
Shipping Configuration
Applies to the standard firmware.
The PCAN-Router Pro contains an example configuration at
delivery. You can change its elements (e.g. the CAN IDs) or use
them as basis for own configurations.
To edit the shipping configuration in the PPCAN-Editor 2 use the file
on the PCAN-Router Pro package:
Configurations\ShippingConfig\ShippingConfig.ppproj
.