Paxar Monarch 1460 Reference Manual Download

Page: 68 / 217

C3. column

Distance to lower left corner of field, from left edge of
print area. Ranges:

English

0 - 399

Metric

0 - 1015

Dots

0 - 767

C4. gap

Number of dots between characters. Range:

0-99

C5. font

Style of font. Options:

Standard

OCRA-like

Reduced

CG Triumvirate Bold

Bold

CG Triumvirate

CG Triumvirate Bold (scalable)

NOTE:

If you have purchased optional fonts, refer to the

Optional Fonts

manual for valid selectors. The

scalable font (Font #

) must be

purchased

separately

for the 9446 and 1460 printers. The

CG Triumvirate fonts and Font #

support only

the ANSI and DOS Code 437 and 850 Page
Symbol Sets. See Appendix C, "Symbol
Sets/Code Pages" for more information.

C6. hgt mag

Height magnifier,

1-7

(times) or

4-90

points for the

scalable font. If using the scalable font on the 9490
printer, the range is

4-200

points. Use a magnifier of

with proportionally spaced fonts, because characters lose
smoothness at higher magnifications for all fonts.

C7. wid mag

Width magnifier,

1-7

(times) or

4-90

points for the scalable

font. If using the scalable font on the 9490 printer, the
range is

4-200

points.

NOTE:

You may need to reconfigure the printer’s
memory to accommodate large point sizes. See
"Defining the Memory Configuration Packet" in
Chapter 3 for more information.

C8. color

Options for Standard Printer Fonts:

Opaque, Normal, Black, Normal

Opaque, Normal, White, Normal

Transparent, Normal, Black, Normal

Transparent, Normal, White, Normal

Opaque, Normal, White, Normal

MPCLII Packet Reference Manual

4-16

Summary of Contents for Monarch 1460

























































































































































































































Search results

Summary of Contents for Monarch 1460

Reviews:

Related manuals for Monarch 1460

Brands by name

Popular brands

Paxar Monarch 1460, Reference Manual

Search results

Summary of Contents for Monarch 1460

Reviews:

Related manuals for Monarch 1460

Brands by name

Popular brands