Paxar Monarch 1460 Reference Manual Download

Page: 140 / 217

Error
Code

Description

705

Invalid batch received. Press the trigger or

clear the error. Check the batch data. Resend the
batch. If the error persists, call Technical Support.

750

Printhead is overheated. Turn the printer off to let
the printhead cool. If the error persists, call
Technical Support.

751

Printer did not sense a black mark when expected.

For errors 751-753, Check the

✦

supply tracking

✦

supply marks

✦

black mark sensor position

✦

supply roll for binding.

Press the trigger or

and try to continue

printing. If the error continues to appear, change
the supply.

752

Printer sensed a mark in the wrong place.

753

Printer sensed a mark that is too long.

754

Printer has a ribbon problem. Check the ribbon.
The printer is either out of ribbon or the ribbon is
jammed.

755

Printhead is open. Close the printhead before
continuing. If the error persists, call Technical
Support.

756

The printer is out of supplies. Load supplies.

MPCLII Packet Reference Manual

9-18

Summary of Contents for Monarch 1460

























































































































































































































Search results

Summary of Contents for Monarch 1460

Reviews:

Related manuals for Monarch 1460

Brands by name

Popular brands

Paxar Monarch 1460, Reference Manual

Search results

Summary of Contents for Monarch 1460

Reviews:

Related manuals for Monarch 1460

Brands by name

Popular brands