Paxar Monarch 1460, Reference Manual

Page: 112 / 217

Status2
C- Field Number represents the field number within each
packet. The packet header is the first
field and each subsequent field is
indicated by the field separator.
Status2
D- Parameter represents the parameter within the field
that the error occurred. The numbering
begins after the field identifier.
Status2
E- Error Number is the error that coincides with the error
numbers presented in Chapter 9, "Errors."
"FMT-1/BCH-2" The format or batch number is returned.
n
If more than one error occurred then only the most serious
error will be acknowledged.
{J,"","F,B,4,6,33","FMT-1","BCH-2"}
Indicates that an error occurred on a bar code ( B ) field within
a format ( F ) packet. The bar code field is the fourth ( 4 ) field in
the packet. The error occurred in the sixth ( 6 ) parameter of
the field. Error number 33 means the bar code density is
invalid.
To clear an error, press the trigger (or
E
depending on
your printer). An ENQ can also clear errors numbered less
than 500. Once the error is corrected, a job request can be
sent. The printer cannot accept another job request until the
error is resolved.
MPCLII Packet Reference Manual
7-10