Paxar Monarch 1460 Reference Manual Download

Page: 136 / 217

Error
Code

Description

424

Item in use. Record the error, then press the feed
button and try to continue. If the error reappears,
call Technical Support.

425

Item already checked out. Record the error, then
press the feed button and try to continue. If the
error reappears, call Technical Support.

426

Item not checked out. Record the error, then press
the feed button and try to continue. If the error
reappears, call Technical Support.

427

Format name is invalid. Valid name is

1 - 8

characters

inside quotes or

for a printer-assigned name.

Press the feed button and try to continue. If the error
reappears, call Technical Support.

428

Batch name is invalid or graphic not found. Press
the feed button and try to continue. If the error
reappears, call Technical Support.

429

A field number appears more than once in a format.

430

The format uses a graphic file that cannot be found.

431

Internal software failure. The format name the task
checked in does not match the name the task added.

432

Internal software failure. The graphic name the task
checked in doesn’t match the name the task added.

433

The batch references a field number that doesn’t
exist in the format.

434

Internal software error caused by a downloaded task
that is not executable. Turn off the printer. Wait two
seconds and turn it back on. If the error persists,
call Technical Support.

MPCLII Packet Reference Manual

9-14

Summary of Contents for Monarch 1460

























































































































































































































Search results

Summary of Contents for Monarch 1460

Reviews:

Related manuals for Monarch 1460

Brands by name

Popular brands

Paxar Monarch 1460, Reference Manual

Search results

Summary of Contents for Monarch 1460

Reviews:

Related manuals for Monarch 1460

Brands by name

Popular brands