Paxar Monarch 1460, Reference Manual

Page: 35 / 217

Defining the Memory Configuration Packet–––––––––––––––––––––
Use the memory configuration packet (M) to customize the
size of your printer’s buffers, which gives you greater flexibility
in your formats. Memory must be allocated in 1/2K
increments. The memory configuration packet does not
accept decimals, so enter whole numbers. Multiply the
amount to reallocate (in K) by 10. For example,
To reallocate (in K) Enter this amount
1 10
1.5 15
2 20
2.5 25
32 320
153 1530
229.5 2295
Each buffer’s allocated memory remains in effect until that
buffer is reallocated. For this reason, you may want to
reallocate all the buffers when reallocating any buffer. If you
reallocate more memory than you have available, you will
receive an error.
Syntax
{
I
,M,buffer,device,buffer_size
p
}
M1. M Memory Configuration Packet
M2. buffer Buffer type:
D Downloadable Fonts
F Format
I Image
R Receive
T Transmit
V Scalable Fonts
M3. device Storage type:
N Non-volatile RAM
R Volatile RAM
Chapter 3. Configuring the Printer
3-15