background image

1

Start Here

Quick Setup Guide

UK/IRE/GEN Version 0

DCP-365CN

DCP-373CW DCP-375CW

DCP-377CW

Before you can use the machine, please read this Quick Setup Guide for the correct setup and installation.

1

Unpack the machine and check the components

WARNING

Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep 
these bags away from babies and children.

„

Most of the illustrations in this Quick Setup Guide show the DCP-375CW

.

a

Remove the protective tape and film covering the machine.

b

Remove the plastic bag

a

 containing the ink cartridges from on top of the paper tray.

c

Make sure you have all components.

WARNING

Warnings tell you what to do to prevent possible personal injury.

CAUTION

Cautions specify procedures you must follow or avoid to prevent possible minor injuries.

IMPORTANT

DO NOT connect the USB cable yet (if you are using a USB 
cable).

Inbox Ink Cartridges

[x4]

Black
Yellow
Cyan
Magenta
(Approx. 65% yield of the 
replacement cartridge) 
For details, see 

Consumable items

 in the 

User

s Guide

.

Quick Setup Guide

User’s Guide

CD-ROM

Power Cord

Note

• The components included in the box may differ depending on your country.
• Save all packing materials and the box in case for any reason you must ship your machine.
• You need to purchase the correct interface cable for the interface you want to use (for USB or network 

connection).

USB cable

Please make sure you use a USB 2.0 cable (Type A/B) that is no more than 2 metres long (cable not included).

Network cable

Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.

1

Summary of Contents for DCP-365CN







































Reviews: