![Patton electronics 6511RC Administrator'S Reference Manual Download Page 93](http://html1.mh-extra.com/html/patton-electronics/6511rc/6511rc_administrators-reference-manual_4025850093.webp)
RIP Version 2 (Status)
83
Model 6511RC Matrix Switch Administrators’ Reference Guide
10 • RIP Version 2
RIP Version 2 (Status)
For each subnet IP address defined in the 6511RC’s RIP Version 2 table, the RIP Version 2 (Status) window
(see
figure 42
) displays the RIP route status and the following statistical counts:
•
Bad Packets
•
Bad Routes
•
Sent Updates
To display the RIP Version 2 (Status) window, on the RIP Version 2 main window, click the Statistics… link.
Figure 41. RIP Version 2 (Status) window
The following sections describe the information displayed on the RIP Version 2 (status) window.
Subnet IP Address (rip2IfStatAddress)
The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where
the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.
Bad Packets (rip2IfStatRcvBadPackets)
The number of RIP response packets received by the RIP process which were subsequently discarded for any
reason (e.g. a version 0 packet, or an unknown command type).
Bad Routes (rip2IfStatRcvBadRoutes)
The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family,
or invalid metric).
Sent Updates (rip2IfStatSentUpdates)
The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full
updates sent containing new information.
Status (rip2IfStatStatus)
Displays whether the RIP status for the Subnet IP Address is valid or invalid. One of the following values will
be displayed:
•
valid(1)—Data may be routed on this interface.
•
invalid(2)—Effectively deletes this interface.
RIP Version 2 (Configuration) window
The RIP Version 2 (Configuration) window (see
figure 42
) displays the configurable parameters for the single
RIP routing domain defined by the IP Address displayed at the top of the table. You can use the RIP Version 2
Summary of Contents for 6511RC
