2 • Home
Model 6511RC Matrix Switch Administrators’ Reference Guide
16
Operator Actions
Hard Reset (hardReset(2))
The Hard Reset button causes the 6511RC to perform a cold restart. When you click Hard Reset, the
6511RC requests confirmation before executing the command, after which, the 6511RC will disconnect all
current sessions, re-initialize the interfaces, and re-load configuration parameters from Flash memory.
Set Factory Default Configuration (forceDefaultConfig(3))
The Set Factory Default Configuration button deletes the current configuration from Flash memory and loads
the factory default parameters into Flash. The factory default settings will not take effect in the 6511RC until it has
been re-booted, for example by doing a Hard Reset.
Note
Set Factory Default Configuration will delete the 6511RC’s Ethernet IP
address, reset the password to the default administrative passwords (see sec-
tion
“Logging into the HTTP/HTML Web Management windows”
on
page 8), and any other site specific-settings made for your particular installa-
tion. In order to use the HTTP/HTML Management windows you will
have to re-enter the 6511RC’s Ethernet IP address and netmask using the
6511RC’s front panel control port. Refer to the Getting Started guide for
information on configuring the IP address.
Summary of Contents for 6511RC
