![background image](http://html1.mh-extra.com/html/patton-electronics/6511rc/6511rc_administrators-reference-manual_4025850043.webp)
Defining a DS0 map using the Long Form
33
Model 6511RC Matrix Switch Administrators’ Reference Guide
5 • DS0 Mapping
TuFormat static connections
To create a DS0 map (cross-connection) between the DS0s from the H.110 and the STM-1 containers using
the TuFormat follow the instructions below.
Figure 21. Configure Static Connections section of DS0 Mapping Configuration window
The drop-down menus in the Defining a Mapping section of the DS0 Mapping Configuration window (see
figure 21
) are organized into tug-3, tug-2, Tu12 and H.110 fields, the Tu designators follow standard SDH/
STM-1 terminology. In displayLongForm mode, you will use drop-down menus and text boxes to define the
DS0 mapping parameters. The following parameters define each channel mapped connection (see
figure 21
).
•
TUG level 3 (tug3)
•
TUG Level 2 (tug2)
•
TU-12 Level (tu12)
•
E1 Slots (Slots)
•
H.110 Direction (toH110, fromH110)
•
H.110 port number
•
H.110 Slots
TUG-3 (Tributary Unit Group 3) (tug3)
There are three TUG-3 multiplexers in a STM-1. Each TUG-3 accepts up to 7 TUG-2 (21 E1 capacity). The
options are:
•
tug3-1(1)
•
tug3-2(2)
•
tug3-3(3)
TUG-2 (Tributary Unit 2) (tug2)
Each TUG-2 container carries up to 3 E1s. Up to 7 TUG-2 are carried in a TUG-3 container. The options are:
•
tug2-1(1)
•
tug2-2(2)
•
tug2-3(3)
•
tug2-4(4)
•
tug2-5(5)
•
tug2-6(6)
Summary of Contents for 6511RC
