Patton electronics 6511RC, Administrator'S Reference Manual

Page: 48 / 170

5 • DS0 Mapping Model 6511RC Matrix Switch Administrators’ Reference Guide
38 Defined Mappings table (static connections)
Defined Mappings table (static connections)
The Define a Mapping (static connections) section of the DS0 Mapping Configuration window (see figure 22 )
displays all previously defined DS0 mappings (cross-connections) in the 6511RC. The parameter details are
described in the following paragraphs.
Figure 22. Configure Static Connections section of DS0 Mapping Configuration window
ID (daxConnectionID)
The connection ID is a number (a positive non-zero integer) that uniquely identifies each DS0 mapping. Con-
nection IDs start with the number one (1), and are incremented sequentially. As DS0 mappings (connections)
are defined, the 6511RC assigns connection IDs automatically. When the user enters DS0 mapping parameters
and clicks the Submit Query button, the 6511RC automatically assigns the next available ID number in
sequence to that connection.
Tug-3
Displays the type of STM-1 multiplexed TUG-3 group.
Tug-2
Displays the type of STM-1 multiplexed TUG-2 group.
Tu-12
Displays the type of STM-1 multiplexed TU-12 group.
E1 #
Displays the E1 port number.
E1 Slots
Displays which 64-kbps time slots (also referred to as the DS0 data communications channels) are used for the
corresponding E1 port.
H.110 Type
Displays the direction of timeslots in reference to the TDM midplane bus.
H.110 Number
Displays the H.110 port number.