DACS Display Type parameter
31
Model 6511RC Matrix Switch Administrators’ Reference Guide
5 • DS0 Mapping
Figure 18. DS0 Mapping diagram
The DS0 mapping window contains the following:
•
DACS Display Type menu you can use to select the Long Form or the Command Line Form methods for con-
figuring the cross-connection mapping (see section
“DACS Display Type parameter”
)
•
Mapping Help button that displays the online help window (see section
“Mapping Help”
on page 32)
•
E1 input format menu used to select Tug format (tuFormat) or the E1 Format (E1PortFormat)
•
Configure Static Connections section in Tu or E1 format where you can create the cross-connections (see sec-
tion
“Defining a DS0 map using the Long Form”
on page 32 or section
“Defining DS0 mappings using the
command line interface (CLI)”
on page 36)
•
Static Connection section where you can view the previously defined DS0 mappings (cross-connections) in
the 6511RC (see section
“Defined Mappings table (static connections)”
on page 38)
DACS Display Type parameter
To define DS0 mappings (connections), you can use either the Long Form or the Command Line Form. To
choose the method you prefer, use the DACS Display Type drop-down box to select one of the following param-
eter values:
•
displayLongForm(0)
—(Factory Default). Most people consider Long Form the easier method for defining
DS0 mappings.The Long Form displays the DS0 Mapping page in the standard management window for-
mat with drop-down boxes and text box fields. Use this format to define the DS0 Mapping parameters by
selecting values from drop-down boxes and typing values in the text box fields. (Refer to section
“Defining
a DS0 map using the Long Form”
on page 32 for information on using the Long Form to configure static
connections.)
•
displayCliForm(1)
—Advanced users of the command line interface (CLI) method may consider CLI a faster
and more convenient method than the Long Form. To use CLI to define DS0 mappings, select
displayCliForm(1) and click on the Submit Query button. The DS0 Mapping page will refresh, displaying
a single text box (in place of the drop-down boxes and text box parameter fields) into which you may enter
CLI commands. (Refer to section
“Defining DS0 mappings using the command line interface (CLI)”
on
page 36 for information on using the CLI to configure static connections.)
DS0 Mapping
Mapping
Help
DS0
Connection
Summary of Contents for 6511RC
