![Patton electronics 6511RC Administrator'S Reference Manual Download Page 69](http://html1.mh-extra.com/html/patton-electronics/6511rc/6511rc_administrators-reference-manual_4025850069.webp)
Modify IP Configuration window
59
6511RC Matrix Switch Administrators’ Reference Guide
8 • IP
Note
The Out Discards counter would include datagrams counted in ipForwDat-
agrams if any such packets met this (discretionary) discard criterion.
Discarded for No Routes
The number of IP datagrams discarded because no route could be found to transmit them to their destination.
Note
The Discarded for No Routes counter includes any packets counted in
ipForwDatagrams which meet this “no-route” criterion. This includes any
datagrams which a host cannot route because all of its default gateways are
down.
Reassembly Timeout
The maximum number of seconds which received fragments are held while they are awaiting reassembly at the
6511RC.
# of Reassembled Fragments
The number of IP fragments received which needed to be reassembled at the 6511RC.
# Successfully Reassembled
The number of IP datagrams successfully reassembled.
Reassembly Failures
The number of failures detected by the IP reassembly algorithm (for whatever reason: timed out, errors, etc.).
Note
The Reassembly Failures value is not necessarily a count of discarded IP frag-
ments since some algorithms (notably the algorithm in RFC 815) can lose
track of the number of fragments by combining them as they are received.
# Fragmented OK
The number of IP datagrams that have been successfully fragmented at the 6511RC.
# Fragmented Failed
The number of IP datagrams that have been discarded because they required fragmenting at the 6511RC, but
were not fragmented because their Don’t Fragment option was set.
# Fragments Created
The number of IP datagram fragments that have been generated at the 6511RC.
# Valid but Discarded
The number of routing entries which were chosen to be discarded even though they are valid. One possible
reason for discarding such an entry could be to make more buffer space available for other routing entries.
Modify IP Configuration window
The IP Configuration window (see
figure 30
) provides the means for you to view and modify the values of the
IP Forwarding and Default Time-to-Live parameters for the 6511RC.
Summary of Contents for 6511RC
