Patlite WD-Z2 Series, Installation Manuallines

Page: 4 / 47

WD-Z2 Series Installation Guidelines Rev.5
- 4 -
2.
WD-Z2 Installation Kits
Below is a list of the items included in each installation kit and their description.
Item Description
Signal Tower
Compatibility
LE / LME LR
Startup Kit Receiver
(with AC adaptor)
Receiver for standard operation use. Yes Yes
Receiver for setup
(without AC adaptor)
Used when configuring the initial settings of the
transmitter in locations such as the office. Also serves
as a spare receiver in the event the main receiver
fails.
Yes Yes
Body unit for setup
Body Unit
Used when configuring the transmitter settings. Can
also be used as a 4-contact transmitter by connecting
a push-button switch, or other switches to the back of
the connector.
*Refer to reference 2 for details on the connector.
Yes No
AC adaptor for the
body unit
AC Adaptor
Supplies power to the body unit when used to setup.
(100 VAC, for Japan only)
Yes Yes
Transmitter
Transmitter for standard operation use in combination
with the LME or LE bracket.
Yes No
Bracket for LME
φ
60 Bracket for attaching the transmitter to the LME
series signal tower. Included with the WDT-6M-Z2.
Yes No
Bracket for LE
φ
50 Bracket for attaching the transmitter to the LE
series signal tower. Included with the WDT-5E-Z2.
Yes No
USB Cable Setup cable for connecting the receiver to a PC. Yes Yes
Customer
Registration Guide
-
The customer is required to register (for Japan only).
When registered, the customer can download
manuals and software packages and can request the
“Radio Wave Environmental Investigation Service” for
use in conjunction with the Startup Kit.
Yes Yes
Setup Kit
Body unit for setup
Body Unit (for LR)
Used when configuring the transmitter settings.
For setting up the WDT-6LR-Z2 and WDT-5LR-Z2.
No Yes
Mounting bracket
A fixture used to enable the body unit to stand by itself
during setup.
No Yes
Conversion cable
A conversion cable used during setup when
connecting the AC adaptor and the body unit.
No Yes
AC Adaptor (100 to 240 VAC)
For use in North America, Europe, and other areas for
supplying power to the body unit, Setup Kit, and
WDR-LE-Z2 during setup. Free-range power supply.
Yes Yes