WD-Z2 Series Installation Guidelines Rev.5
- 11 -
Step 4. Equipment Investigation with Signal Tower
●Purpose
To check that the Signal Tower model is one which can be attached with the WD and be attached to the targeted
equipment.
If the WD cannot be attached to the Signal Tower, this next step is to review the specifications to find a compatible
LR/LME/LE Series model.
- Check list
Check Specifications
Contents
Equipment Information
Equipment name and other identifiable equipment information such as
asset management number.
Manufacturer
Signal Tower manufacturer name which is mounted on the equipment
Model
Signal Tower model
Power Supply Voltage
Signal Tower's power supply voltage
Mounting Method
Type of mounting: L-bracket, direct, pole-mount, etc.
Display Color
From the top: Red, Amber, Green, and so on.
Buzzer
Equipped with or without a buzzer
Flashing Action
A function to turn flashing on or off
Flashing Cycle
A required setting is in the transmitter's “Determining Signal Tower Input
settings”. Checking the length of one ON/OFF cycle, the internal Signal
Tower flashing cycle is 1 second (ON: 0.5 seconds, OFF: 0.5 seconds).
Determine WD compatibility Go to step 5, “Device Settings List”.
Replacement model
Go to step 5, “Device Settings List”.
* For a target equipment worksheet, refer to "Reference 3: Sample Target Equipment Investigation Sheet".
