WD-Z2 Series Installation Guidelines Rev.5
- 9 -
4.
WD Installation Startup
Step 1. Determine the equipment for WD installation
●Purpose
Decide on which machinery the equipment operation data will be collected from. If there is a large number of
machinery, consider to make an order of installation in the installation area.
Note
Select a machine for one receiver, and establish an operation period for testing, such as verifying the
operation of the collected operation log data and determine the installation order.
Step 2. Determine the operation log data utilization method
●Purpose
Clarify the log data application and select the appropriate software, based on operation status and operation
analysis visualization, etc.
①
Select from PATLITE partners that support the WD system when using software packages.
There is a benefit of being able to start operations right away when following the WD system installation.
=>Consult with PATLITE if customization is required.
②
When developing your own application:
(1) Use the PATLITE WDS application (WDS-AUTO2/WDS-WIN01) when generating CSV log data.
=> Before selecting which WDS to use, refer to "Reference 7: WDS Selection".
(2) Operation data can be collected from the receiver via LAN communication, without the PATLITE
(WDS-AUTO2/WDS-WIN01) application software.
*If considering on developing an application, first contact your PATLITE sales representative.
Note
- Refer to the "WDS Application User Manual" for details on WDS-AUTO2.
- Refer to "3.1 Checking CSV Files" in the "WDS Application User Manual", for details on CSV log data.
- Refer to the "WDS-WIN01 Instruction Manual" for details on the WDS-WIN01.