WD-Z2 Series Installation Guidelines Rev.5
- 17 -
②
Setup Items
Information required for setup
Description
Kitting sheet item number
Wireless settings
ExtendedPanID
③
ExtendedPanID
Wireless channels
④
Wireless channel
Run time settings
Determining Signal Tower Input
⑤
Flashing cycle
Power supply settings *1
⑥
Power supply wire
Transmission mode
-
*1 For the LR series, use "Power Supply Wire". For more information, refer to the "WDS-WIN01 Instruction
Manual".
- Set the contents from the "Transmitter Kit Sheet" one unit at a time for the WDS.
- Copy the transmitter’s MAC address to the "Kit Sheet".
Using "WD-Z2-specific system settings" for LE/LME series
*For details on the setup method, refer to the "WD-Z2-specific System Settings Application Operation
Manual".
Using "WDS-WIN01" for LR series
*For details on the setup method, refer to the "WDS-WIN01 Instruction Manual".
ExtendedPanID
Wireless channels
Determining Signal Tower Input
Transmission mode
Power supply settings
ExtendedPanID
Wireless channels
Determining Signal Tower Input
Power supply settings
Transmission mode
