WD-Z2 Series Installation Guidelines Rev.5
- 30 -
Step 8. System Operation Check
WDS-AUTO2 Operation Check
(1) Register the WDT “username” (create an .init file)
- The following explains the settings in WDS-AUTO2 to associate the equipment name with the transmitter’s
MAC address for each equipment.
(1-1) Start-up the WDS-AU file settings application.
Note
In the MAC address field marked in red, enter the transmitter MAC address for each equipment from the “Kit
Sheet”, and in the “username” field, register the equipment name from the “Target Equipment Investigation”
sheet.
(2) WDS-AUTO2 Default Settings
(2-1) Start-up the WDS-AUTO2 application.
CAUTION
- WDS-WIN01 requires administrator privileges prior to use.
- If starting WDS-AUTO2 for the first time, it will request to select the .init file, first. Specify the file created in
step “(1) Register the WDT “username” (create an .init file)”.
