WD-Z2 Series Installation Guidelines Rev.5
- 24 -
LR series Signal Tower
(1-1) Mounting the transmitter on the signal tower
- For the Signal Tower that requires a WDT Installation, mount the WDT transmitter after the settings are
already prepared, to the Signal Tower.
CAUTION
Prohibited
◆
Do not attach this product to the upper part of the adjoining body unit. If this product is
attached on top of an LED unit, the status shown by the indicator lamp on this product will be
difficult to assess.
◆
Do not detach multiple connected units, except the headcover, from this product or the body
unit. When detaching units (this product, LED unit, or buzzer unit) from the body unit or this
product, detach units one at a time.
Failure to follow these instructions could result in equipment damage.
