9
Safe
Safe
Safe
Safe Torque
Torque
Torque
Torque Off (STO)
Off (STO)
Off (STO)
Off (STO)
72
07-02-12-02-EN-V1215.doc / Type:
638
8
Commissoning
8.1
Commissioning Preparation
Caution !
Improper installation conditions and/or wiring can cause uncontrolled movement
and operation of the equipment.
Please carefully observe all safety instructions and regulations for the protection of
both the equipment and personnel!
It is recommended that one utilize the
EASYRIDER
Windows - Software Program for the initial set-
up of the equipment. This program communicates through the serial interface of the computer to
the attached drive.
Information concerning the operation of the EASYRIDER
software is discussed in this
chapter.
We suggest that the software be first run in the “Simulation“ mode in order for the user to become
familiar with and comfortable the system.
The EASYRIDER
Windows - Software also provides for additional interactive “Help” functions.
Due to security concerns some of the Menus are password protected.
The set up and start up of the equipment must be carried out by qualified personnel only.
The installation must be performed taking into consideration all of the specific safety regulations and
security related functions, concerning the equipment.
Double check all safety and security related items, including the limit switch.
The conformity of the motor feedback system and the X300 feedback module built-in to the drive must
be checked by examining the name plates on the equipment.
For the initial equipment start up involving critical applications, we recommend that a test be run
without the mechanical connection being made. If problems do arise then they can be solved without
risk of damage to any other attached equipment.
An experienced installer does have the possibility of tailoring the installation to meet the specific
application requirements, provided that he/she assumes all of the responsibility for any alterations or
deviations from the prescribed installation instructions.
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - [email protected]
