2
Connection Assignments and Functions
Connection Assignments and Functions
Connection Assignments and Functions
Connection Assignments and Functions
07-02-12-02-EN-V1215.doc / Type:
638
25
●
Feedback Connection X30 (SUB D 09 Socket)
Pinning for the Motor - Feedback - Socket X30 when employed with:
Resolver Module X300_RD2 or X300-RM1(Standard Module)
Module: X300_RD2 / X300_RM1
Setup
and Wiring example
PIN
X30
Function
1
-
2
PTC1) / NTC optional
3
cos +
4
sin +
5
c
6
PTC1) / NTC optional
7
cos -
8
sin -
9
carrier -
1)
With parameter setting PTC can you temperature sensor Typ KTY (note poling)
or thermo switch used.
EASYRIDER Menu „Configuration Motor / X30
Switch off at:“
use resistor value in Ohm.
For thermo switch is the value 1000 Ohm in the EASYRIDER Menu
„Configuration Motor / X30
Switch off at:“
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - [email protected]
