Safety Precautions
Safety Precautions
Safety Precautions
Safety Precautions
07-02-12-02-EN-V1215.doc / Type:
638
9
Safety Precautions
Attention !
Digital servo drives, corresponding to EN 61800-5-1/VDE 0160, are electronic
power components utilized for the regulation of the flow of energy in high-voltage
electrical power installations. They are exclusively designed, configured and
approved to supply our servo motors. Handling, installation, operation, and
maintenance are only permitted under the conditions of and in keeping with the
effective and/or legal regulations, regulation publications and this technical
document.
The operator must make sure that these regulations are strictly followed.
The Concept of Galvanic Separation and Insulation:
Galvanic separation and insulation corresponding to EN 61800-5-1/VDE 0160,
provides for additional insulation protection.
In addition,
all digital signal inputs and outputs are provided with a galvanic
separation utilizing either a relay or an optical coupler. In this way, an increased
level of protection against potential interference and a limitation of potential
damage due to incorrect connections are provided.
The voltage level must not exceed the designated low safety voltage of
60V DC or 25V AC, respectively, in accordance with EN 61800-5-1/VDE 0160.
The operator must make sure that these regulations are strictly followed.
Danger !
High Voltage!
Danger of Electrocution !
Life Threatening Danger !
Certain parts of the servo drive are supplied with dangerous
electrical current. Physical contact with these components
can cause death, life threatening injuries and/or serious damage to
equipment and property.
Warning !
Hot Surface
!
Caution !
Due to safety considerations and product guarantees, the operator
is prohibited from opening the servo drive case. Service,
maintenance and repair of our products should only be carried out
by specified representatives of the company. Expert configuration
and professional installation, as described by this document, are
the best way to insure problem-free operation of our servo drives!
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - [email protected]
