Parker 590+ series, Product Manual

Page: 180 / 545

6-4
The Keypad
DC590+ Series DC Digital Drive
Keypad LEDs
There are seven LEDs that indicate the status of the Drive. Each LED is considered to operate in three different ways:
The LEDs are labelled HEALTH, RUN, STOP, FWD, REV, and LOCAL (as SEQ and REF). Combinations of these LEDs have
the following meanings:
HEALTH (OK) RUN STOP Drive State
Re-Configuration
Tripped
Stopped
Stopping
Running with zero reference
Running
Autotuning
FWD REV Forward / Reverse State
Requested direction and actual direction are forward
Requested direction and actual direction are reverse
Requested direction is forward but actual direction is reverse
Requested direction is reverse but actual direction is forward
LOCAL SEQ LOCAL REF Local / Remote Mode
Start/Stop (Seq) and Speed Control (Ref) are controlled from the terminals
Start/Stop (Seq) and Speed Control (Ref) are controlled using the Keypad keys
OFF
FLASH
ON