Parker 590+ series, Product Manual

Page: 280 / 545

B-8 Certification
DC590+ Series DC Digital Drive
Recommended Wire Sizes
North American wire sizes (AWG) are based on NEC/NFPA-70 for ampacities of thermoplastic-insulated (75ºC) copper conductors assuming not
more than three current-carrying conductors in raceway or cable, based on ambient temperature of 40ºC. The wire sizes allow for an ampacity of 125%
of the rated input and output amperes for motor branch-circuit conductors as specified in NEC/NFPA-70.
The table below gives the wire sizes for the input (supply) and output (motor) wiring. The table includes the rated input and output amperes for each
model at 460V or 575V operation.
Recommended Wire Sizes (Frames 1, 2, 3, 4 & 5)
Main power wiring. Local wiring regulations always take precedence.
Input Output
Drive
Size
(A)
Input Current
(A)
Number of
Conductors
North American
Wire Size
Output Current
(A)
Number of
Conductors
North American
Wire Size
Frame 1
15 13.5 1 12 AWG 15 1 12 AWG
35 28.35 1 8 AWG 35 1 8 AWG
Frame 2
40 36 1 8 AWG 40 1 8 AWG
70 63 1 1 AWG 70 1 3 AWG
110 99 1 1 AWG 110 1 1/0 AWG
165 148.5 1 3/0 AWG 165 1 4/0 AWG
Frame 3
180 162 1 4/0 AWG 180 1 4/0 AWG
270 243 1 350 Kcmil 270 1 500 Kcmil
Frame 4 & 5
380 342 1 700 Kcmil 380 1 750 Kcmil
500 450 1 1250 Kcmil 500 1 1500 Kcmil
725 653 1 3 inch bus bar 725 1 3 inch bus bar
830 747 1 3 inch bus bar 830 1 4 inch bus bar
1580 1427 2 4 inch bus bar 1580 2 4 inch bus bar