Parker 590+ series, Product Manual, Page: 210 / 545

7-8 Trips and Fault Finding
DC590+ Series DC Digital Drive
Hexadecimal Representation of Trips
The LAST ALARM, HEALTH WORD, HEALTH STORE and ALARM HISTORY parameters use a four digit hexadecimal number to identify
individual trips. Each trip has a unique corresponding number as shown below.
Trip Codes : LAST ALARM only
14 AUTOTUNE ERROR F 0 0 1
14 AUTOTUNE ABORTED F 0 0 2
14 SEQ PRE READY
F 0 0 3
14 CONTACTOR DELAY F 0 0 4
14 EXTERNAL TRIP F 0 0 5
14 REMOTE TRIP F 0 0 6
14 ENABLE LOW F 0 0 7
14 SEQUENCING F 0 0 9
14 COMMS TIMEOUT F 0 1 0
14 CONFIG ENABLED F 2 0 0
14 CALIBRATION TRIP F 3 0 0
14 NO OP-STATION F 4 0 0
14 AUX SUPPLY F F 0 3
LAST ALARM, HEALTH WORD and HEALTH STORE
Trip
Trip Code
First Digit Digit Digit Last Digit
NO ACTIVE ALARMS
0 OVERSPEED 1
1 MISSING PULSE 2
2 FIELD OVER I 4
3 HEATSINK TRIP * 8
4 THERMISTOR 1
5 OVER VOLTS (VA) 2
6 SPD FEEDBACK 4
7 ENCODER FAILED 8
8 FIELD FAILED 1
9 3 PHASE FAILED * 2
10 PHASE LOCK 4
11 5703 RCV ERROR 8
12 STALL TRIP 1
13 OVER I TRIP 2
14 OTHER • 4
15 ACCTS FAILED * 8
* Refer to “
4H
Power Board LED Trip Information (Frame 4, 5, 6 & H)
” below
•
For the LAST ALARM parameter, replace OTHER with trip codes opposite.