Parker 590+ series, Product Manual, Page: 182 / 545

6-6
The Keypad
DC590+ Series DC Digital Drive
The Local Menu
There is also a separate Local menu which provides
Local Setpoint information. This menu can be
accessed from anywhere in the Menu System by
pressing the
L/R key. Holding the M key down in
the Local menu will display additional Feedback
information. A toggle to the Local menu displays
whichever is in force, Forward or Reverse,
previously selected by the
FWD/REV key.
The L/R Key
The L/R key (Local/Remote) only operates when
the motor is stopped. It toggles the drive between
Local or Remote control and an appropriate menu
on the Keypad is displayed; either a Local menu
when in Local control, or a main programming
menu from the Menu System when in Remote
control.
When in Local control, the Local LEDs, SEQ and
REF, are illuminated and the RUN, STOP, JOG,
FORWARD/REVERSE, UP and DOWN local
control keys can be used to control the motor speed
and direction.
Pressing the L/R key when in Local control mode selects Remote control
mode and returns you to your previous menu in the Menu System.
The PROG Key
The PROG key only operates when in Local control mode. It toggles the display between the Local menu and the main Menu System but the drive
remains in Local control. Thus, the PROG key allows you to make changes to parameters normally available in Remote control mode whilst
remaining in Local mode operation.
HINT: W hen operating the drive locally, it is quite useful to have a relevant parameter selected in the main Menu System for easy access.
Figure 6-3
Viewing the Local Menu