Publication Number 53923. Issue 3, March 2016
Wayfarer 6 Generic Service Manual
Page 50
3.
Separate the printer assembly from the console as shown in Figure 13 so
that you can gain access to the rear of the console.
Figure 13. Accessing The Rear of The Console
4.
As shown above, the cable connections are colour coded to ease
identification as follows: 3G/4G (red), Smart Card (blue) and GPS (yellow).
Disconnect the 3G/4G RF connector (MMCX type) and smart card RF
connector (SMB type) from the rear of the console. Next, disconnect the GPS
RF connector (SMA type) by gripping the nut and unscrewing anticlockwise.
Finally, detach the static wire from the tag on the rear of the front console
(refer to figure 45).
Printer
Assembly
Console
A
View on ‘
A
’ showing cable connections on
rear of console
Colour coded
Detail ‘A’
See Detail ‘A’
Static
wire
fits
here
