Publication Number 53923. Issue 3, March 2016
Wayfarer 6 Generic Service Manual
Page 64
Figure 25. Display Removal
7.3.13 Removing The Keyboard PCB / Keycaps / Keymat Assy
1.
Remove the display assembly from the front moulding as described in
Paragraph 7.3.11.
2.
Using a pozi screwdriver and referring to Figure 26 undo and remove the ten
pozi PT screws securing the keyboard PCB to the front moulding.
Note:-
The keymat and keycaps fit between the keyboard and the front
moulding. If you lift the keyboard PCB out then the keycaps will fall
off. To prevent this, leave the keyboard PCB on the front moulding,
whilst holding it against the moulding turn it over and then lift off the
front moulding as shown in Figure 27.
Mounting plate
Display
Metal tabs
(4 positions)
