Publication Number 53923. Issue 3, March 2016
Wayfarer 6 Generic Service Manual
Page 80
•
Removing The Paper Out Microswitch
Remove the lower paper guide as described above.
Next, remove the two wires from the connector (PL2). Now remove
the two No. 2 screws securing the microswitch to the floor of the
lower paper guide (Figure 38) and lift the microswitch clear, pulling
the attached cable assembly up through the hole in the base of the
paper guide.
Figure 38. Paper Out Microswitch Fitting
Retain the connector for use when the microswitch is replaced.
SPRING PIN
LOCATION
MICROSWITCH
CABLE
ASSEMBLY
NO. 2 SCREWS
(2 OFF)
LOWER PAPER
GUIDE