Publication Number 53923. Issue 3, March 2016
Wayfarer 6 Generic Service Manual
Page 23
4.1.1
Fitting The Wayfarer 6 Mounting Tray
There is no requirement for the Wayfarer 6 and its tray to be electrically isolated
from the vehicle chassis, therefore the mounting tray can be mounted directly to
the vehicle metalwork or other suitable mounting medium.
If new fixing holes are to be drilled to mount the tray then they should be secured
using M5 fixings, this also maintains compatibility with existing vehicle installations
(Wayfarer 2, 3, 150 or 200 ETM’s). Referring to Figure 4 they should be drilled as
follows:
Figure 4. Typical Wayfarer 6 Mounting Tray (generic version)
