A. Configuration Options
A-10
February
2001
8776-A2-GB20-40
Management and Communication Menu
The Management and Communication menu includes the following:
Telnet Session Options (
Table A-5
)
General SNMP Management Options (
Table A-6
)
SNMP NMS Security Options (
Table A-7
)
SNMP Trap Options (
Table A-8
)
Telnet Session Options
Telnet Session configuration options control whether a Telnet session is allowed
through an interconnected IP Network. If allowed, these options determine what
level of security applies to the session to control access. Only one Telnet session
is allowed at a time. Initial values are determined by the configuration you currently
have loaded.
To access the Telnet Session Options screen, follow this menu selection
sequence:
Main Menu
→
Configuration
→
Current Configuration
→
Management and Communication
→
Telnet Session
main/config/management/telnet Hotwire
Slot 4 Model: 8776
TELNET SESSION OPTIONS
Telnet Session: Enable
Telnet Login Required: Enable
Session Access Level: Administrator
Inactivity Timeout: Enable
Disconnect Time (Minutes) 5
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save
Summary of Contents for Hotwire 8776
