5. Testing
5-8
February 2001
8776-A2-GB20-40
Device Tests
The Device Tests menu lists a single, card-level test, the Lamp Test. To access the
Device Tests screen, follow this menu selection sequence:
Main Menu
→
Test
→
DeviceTests
Lamp Test
The Lamp Test determines whether all LEDs are lighting and functioning properly.
Procedure
To test the LEDs:
1. Position the cursor at the Start command next to Lamp Test on the Device
Tests screen.
2. Press Enter.
The Start command is changed to Stop. During the Lamp Test, all LEDs blink
simultaneously every second. When you stop the Lamp Test, the LEDs are
restored to their normal condition.
3. To stop the Lamp Test, position the cursor at the Stop command.
4. Press Enter.
main/test/device Hotwire
Slot: 4
Model: 8776
DEVICE TESTS
Test Command Status
--------------------------------------------------------------------------------
Lamp Test: Start Inactive
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Summary of Contents for Hotwire 8776
