Index
IN-4
February 2001
8776-A2-GB20-40
O
OK LED, 4-15
OOF (Out Of Frame), status message, 4-4
Operator
ATI access level, 7-1
Telnet Access Level, A-11
options
configuration tables, A-1
options, configuration tables, A-1
overview
termination unit’s features, 1-1
user’s guide, v
P
Passed, self-test result, 4-5
passwords, entering, 7-3
pattern test, 5-7
Payload Rates, 3-11, A-3
Peer IP Address, A-3
performance statistics
Current Network, 4-10
DSL Network, 4-8
G.703, 4-12
Network Error, 4-6
physical environment requirements, D-1
pin assignments, C-1
Port Status, A-5
power requirements, D-1
Primary Clock
Failed, status message, 4-4
Source, A-6
R
RAI (Remote Alarm Indication), status message, 4-4
Rate
Auto, A-3
DSL Line, A-3
Fallback, status message, 4-3
Mismatch, status message, 4-4
Payload, A-3
Rates
Payload, 3-11
related documents, vi
Remote
management features, 1-2
Send Line Loopback, 5-6
Repeater Loopback (RLB), 5-4
Reset Device, from Control menu, 3-12
Reset Slot, from MCC, 3-12
resetting
the AutoRate feature, 3-11
the unit from the Control menu, 3-12
restoring access to the ATI, 3-4, 3-12
S
safety certifications, D-1
saving configuration options, 3-7
screen area, 2-5
security, 7-1
options, A-14
self-test results, 4-5
Send
AIS on Network Failure, A-6
and Monitor 511, 5-7
Remote Line Loopback, 5-6
Session Access Level, Telnet, A-11
size of card, D-1
SNMP
Community Name Access, A-13
configuring traps, 6-2
General Management Options, A-12
Management
enabling/disabling, A-13
general, 1-4
limiting access, 7-4
NMS Security, 7-4
Options, A-14
system entries, 3-2
Traps
enabling/disabling, A-17
Options, A-16
support, 1-4
traps, B-1
specifications, D-1
starting an ATI session, 2-2
start-up, 2-1
status
Port, G.703, A-5
test messages, 4-5
Status menu
Network Error Statistics, 4-6
Network Performance Statistics, 4-8
Performance Statistics
Current Network, 4-8, 4-10
G.703 Statistics, 4-12
System and Test Status, 4-2
subnet
IP addresses, 8-1
System
device name field, 3-2
Identity information, 3-2
LEDs, 4-15
Operational, status message, 4-4
Options, A-8
Summary of Contents for Hotwire 8776
