Paradyne Hotwire 8776, User Manual

Page: 54 / 112

5. Testing
5-2
February 2001 8776-A2-GB20-40
Running Network Tests
Network tests require the participation of your network service provider.
To access the Network & G.703 Tests screen, follow this menu selection
sequence:
Main Menu
→
Test
→
Network & G.703 Tests
Use the Command column to start or stop a test. When the Status column shows
that a test is Inactive, Start is displayed; when a test is Active, Stop is displayed.
Position the cursor at the desired Start or Stop command and press Enter. The
Results column displays the test duration.
Selecting a Stop command on the Network & G.703 Tests screen, or Abort All
Tests from the Test menu, will not disrupt a network-initiated loopback.
When the Send and Monitor 511 test is active, ResetMon is available to reset the
error counter to zero.
main/test/network Hotwire
Slot: 4 Model: 8776
Port: 4
NETWORK & G.703 TESTS
Test Command Status Results
--------------------------------------------------------------------------------
Local Loopbacks
Network Line Loopback: Start Inactive 00:00:00
G.703 Repeater Loopback: Start Inactive 00:00:00
G.703 DTE Loopback: Start Inactive 00:00:00
Remote Loopbacks
Send Line Loopback: Down Send Inactive 00:00:00
Pattern Tests
Send and Monitor 511 Stop Active hh:mm:ss - Errors 99999+
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
ResetMon