Paradyne 1813 User Manual Download

Page: 93 / 135

Command Line Interface User’s Guide

The offset value which is a decimal in the range of 0 to 65535.

<value>

Value of the CMV. Value is expected in hexadecimal format.

Type of operation ( Read or Write ).

<msgid>

Message Id in decimal digits.

5.10.6

delusercmv

delusercmv <index>

Deletes the specified user CMV. The user cmv was added with the “addusercmv” command.

<index>

Index of CMV: MASK/ OPTN/ PSDM/ RXDA/CNTL/ TEST/ TXDA/ ADPT/ DIAG/ FLAG.

5.10.7

listusercmv

This command lists the User CMVs added by the

addusercmv

command.

5.10.8

eread

eread <offset> <size>

This command displays the Eagle 16 bit data memory

COMMAND DESCRIPTION

0 - 3ffff (hexadecimal)

<size >

1 - 256 (decimal)

5.10.9

ewrite

ewrite <offset> <value>

This command writes one 16-bit word into Eagle 16 bit data memory.

1800-A2-GB20-00

Summary of Contents for 1813








































































































































Search results

Summary of Contents for 1813

Reviews:

Related manuals for 1813

Brands by name

Popular brands

Paradyne 1813, User Manual

Search results

Summary of Contents for 1813

Reviews:

Related manuals for 1813

Brands by name

Popular brands