Paradyne 1813 User Manual Download

Page: 60 / 135

Command Line Interface User’s Guide

enables VLAN

off

disables VLAN

5.3.13

fdbmode

fdbmode [single/multi]

configures the forwarding database learning type.

COMMAND DESCRIPTION

multiple

The learned entries will be distributed to five databases, (VLAN 1~4 and non-VLAN)

single

The learned entries will be collected into a single database.

5.3.14

igmpsnooping

igmpsnooping on/off

Enables or disables IGMP snooping for VLAN.

COMMAND DESCRIPTION

enables IGMP snooping

off

disables IGMP snooping

5.3.15

stp

The spanning tree commands are located in the “stp” directory (which is located in the “bridge”
directory).

port

port <portname> -o -priority <priority> -linkcost <linkcost>

Specifies properties of the port or interface of the bridge.

60 1800-A2-GB20-00

Summary of Contents for 1813








































































































































Search results

Summary of Contents for 1813

Reviews:

Related manuals for 1813

Brands by name

Popular brands

Paradyne 1813, User Manual

Search results

Summary of Contents for 1813

Reviews:

Related manuals for 1813

Brands by name

Popular brands