Paradyne 1813 Page 27 User Manual Download

Page: 27 / 135

Command Line Interface User’s Guide

2.6.4

rarpd

rarpd <-a | interface>

The

rarpd

command starts the RARPD on the specified interface or all the interfaces.

EXAMPLE

rarpd eth0

This command starts the RARPD on eth0 interface.

rarpd eth0

If RARPD is already running the above command, it displays: “Rarpd is already running on the
interface”

rarpd -a

This command starts the RARPD on all the interfaces.

2.7

timeout

timeout -t(telnet) n(seconds)

The

timeout

command sets up the timeout period for the telnet session

COMMAND DESCRIPTION

the timeout period in seconds, which can be up to 300 seconds.

EXAMPLE

timeout -t 300

The command configures the timeout period to 300 seconds.

2.8

baudrate

baudrate <value>

1800-A2-GB20-00

Summary of Contents for 1813








































































































































Search results

Summary of Contents for 1813

Reviews:

Related manuals for 1813

Brands by name

Popular brands

Paradyne 1813, User Manual

Search results

Summary of Contents for 1813

Reviews:

Related manuals for 1813

Brands by name

Popular brands