Command Line Interface User’s Guide
This enables or disables NAT (Network Address Translation) for this PPP interface. The default
is for NAT to be disabled.
mask
This specifies the netmask for the PPP interface. The mask is specified in dot notation
(i.e.255.255.255.0).
OUI vpnId
This specifies the VPN encapsulation. The OUI (Organizationally Unique Identifier) and VPN
identifier are specified as numbers.
EXAMPLE
pppoa 1 –o -if ppp0 -vpi 0 -vci 100 -user jones -pass Indiana
This command defines a PPPoA profile. The ppp0 interface is used with the ATM connection
with vpi 0 and vci 100. The user name is “jones” and the password is “Indiana”.
5.15.8
pppoastart
pppoastart <Profile>
This command starts PPPoA given the specified profile. The profile is specified with an integer
(0, 1, 2). The profile was previously specified with the pppoa command.
5.15.9
pppoastop
pppoastop <Profile>
This command stops PPPoA given the specified profile. The profile is specified with an integer
(0, 1, 2). The profile was previously specified with the pppoa command.
5.15.10
pppoalist
pppoalist [-profile Profile]
This command displays the listing of all available free profiles. If -profile is not specified, this
command will display all the valid configured profiles.
5.15.11
pppoadel
pppoadel <profile> | all
This command deletes the specified profile. Profile is specified as a number (see pppoa
command). If all is specified, then all profiles are deleted. This command only deletes inactive
profiles. If a profile is in use, it must be stopped before it can be deleted.
1800-A2-GB20-00
107