manualshive.com logo in svg

Paradyne 1813, User Manual

Share
Download
Paradyne 1813 User Manual Download Page 103

 

 

 

Command Line Interface User’s Guide 

COMMAND DESCRIPTION 

profile 

Profile number to configure. Specify an integer number from 0 through 7. 

Interface 

Interface name with unit number. Eight PPP interfaces are available: ppp0, ppp1, ppp2, ppp3, 
ppp4, ppp5, ppp6, ppp7. These interfaces are configured for the PPPoE and PPPoA services. 

Encapsulation 

Encapsulation type (LLC or VC) 

Timeout 

timeout (in milliseconds). The default is 3000 milli seconds. 

Auth 

authentication (PAP, CHAP, BOTH, MSCHAPV1, MSCHAPV2) 

IPAddr 

Desired self IP address (in dotted decimal, e.g., 192.168.32.32) 

PeerIPAddr 

Peer IP Address (in dotted decimal) 

MTU 

Maximum Transmission Unit expressed in bytes. The default is 1500. 

MRU 

Maximum Receive Unit, negotiated in LCP. The default is 1500. 

Ethaddr 

Hardware address of the endpoint for this connection. Typically one of the Ethernet hardware 
addresses of the endpoint is used for this. The address is specified with ‘:’ used as a delimiter 
between byte values (eg 10:11:12:13:14:15). 

ServiceName 

Service Name. 

ACName 

Access Concentrator name. 

HostTag 

Use host unique tag. 

Username 

Username. 

Password 

Password. 

1800-A2-GB20-00 

                  

103

 

Summary of Contents for 1813








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands