Paradyne 1813 User Manual Download

Page: 75 / 135

Command Line Interface User’s Guide

Traffic Name Weight (%)

---------------------------------

Default 5

Low 5

Medium 5

High 5

Critical 5

Real Time 65

Premium 5

Urgent 5

5.5.15

Attach

attach

attach <interface_name> -o linkspeed <kbps> admission <yes/no> borrow <yes/no> ackpriority

This command is used to attach an interface to WFQ.

Default Link Speed : Baud rate of the interface

Default admission: no

Default Borrow: yes

Default AckPriority : Disable

COMMAND DESCRIPTION

<interface_name>

Attach the traffic scheduler to outgoing interface.

linkspeed <kbps>

Set the link speed of the interface.

admission <yes/no>

Set “yes”, the all weights will be in default queue.

borrow <yes/no>

Decide the residue bandwidth can be reuse or not.

1800-A2-GB20-00

Summary of Contents for 1813








































































































































Search results

Summary of Contents for 1813

Reviews:

Related manuals for 1813

Brands by name

Popular brands

Paradyne 1813, User Manual

Search results

Summary of Contents for 1813

Reviews:

Related manuals for 1813

Brands by name

Popular brands