manualshive.com logo in svg

Paradyne 1813, User Manual

Share
Download
Paradyne 1813 User Manual Download Page 64

Command Line Interface User’s Guide 

ifname -act allow|deny 

l2_fil del -o priority_number 

Sets up the layer 2 filter. L2 Filters for this endpoint are based on MAC addresses. 

 

COMMAND DESCRIPTION 

<priority>  

This is the priority level of the rule, smaller numbers have higher priorities, if a conflict between 
rules occurs. The number ranges from 0 to 19. 

srMac 

The Source MAC address that is to be filtered. The address is specified by a hex code for each 
byte separated by a colon (:). For example: 00:01:33:44:5F:2C. 

 

[multicast|dstMac] 

This is the destination MAC address of the packet. The address is specified by a hex code for 
each byte separated by a colon (:)  If multicast is typed, the Multicast MAC address is used for 
the destination MAC address.  

Eth_type 

Enter the Ethernet Type in hexadecimal format. For example, enter 0800 for IP address, or enter 
0806 for ARP. 

ifname 

This option selects the interface for the packet, from the Interface dropdown list. The available 
interface options are eth0, wlan0 and atm0.  

allow|deny  

When allow is specified, the frame will be forwarded. When drop is specified, the frame will be 
dropped. 

64                                                                                                                                                                      1800-A2-GB20-00 

Summary of Contents for 1813








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands