manualshive.com logo in svg

Paradyne 1813, User Manual

Share
Download
Paradyne 1813 User Manual Download Page 53

 

 

 

Command Line Interface User’s Guide 

5.2.5

 

elink 

elink <interface> -o [[auto] | [10 | 100 | auto_speed ] | [half | full | auto_duplex] 

 

The 

elink 

command configures the speed and/or duplex of the Ethernet interface. The default 

setting is auto for auto negotiation. With auto negotiation, both the speed and duplex are 
configured based upon what the link is connected to. It is also possible to configure the duplex, 
say half and full, and specify auto_speed so that only the speed is auto negotiated. Similarly for 
auto_duplex. 

 

COMMAND DESCRIPTION 

<interface> 

The name of the Ethernet interface. This is eth0. 

Auto  

This specifies that both the speed and duplex are auto negotiated. 

10 

This specifies that the speed is set to 10M bits per second. 

100 

This specifies that the speed is set to 100M bits per second. 

auto_speed 

This specifies that the speed is auto negotiated. 

half 

This specifies half duplex 

full 

This specifies full duplex 

auto_duplex 

This specifies that the duplex is auto negotiated. 

 

EXAMPLE 

[1234 @ ethernet]$ elink eth0 -o 10 half 

This command sets the Ethernet to a speed of 10Mbps half duplex. 

[1234 @ ethernet]$ elink eth0 -o auto_speed full 

The speed will be auto negotiated and the link will use full 

 

1800-A2-GB20-00 

                  

53

 

Summary of Contents for 1813








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands